Dictate sudden drop locates G00 dictates linear interpolation G0l dictates

- - G instruction nods fixed position G00 to dictate linear interpolation G0l dictates G dictates ＊ chooses form of statement of fixed position G00 quickly related athletic way quickly related athletic way: Function of G00X _ Z__ : G00 instruction cutting tool from current drop definitely fast on the day punctuation that moves to be appointed to place of X, Z, when cutting tool is moving, its feed course may be broken line, each axis of this and parameter set definitely fast feed speed is concerned. Explain: X, Z is when G90, it is to look the coordinate of punctuation is worth when G91, the punctuation that it is eye is apart from at bit more initiative shift relatively. Example: Exemple graph 1, if the fast feed of X axis is 300mm/min Z axis definitely fast feed speed is 600mm/min, of cutting tool only then the A dot that the dot is located in workpiece coordinate to fasten. It is % 1008 when the program (1)N01 G92 X90 Z253 seeing a picture (build workpiece coordinate) N02 G90 G00 X30 X173 (or one 60Z of G91 G00X one 80)N03 X90 Z253 (or when X60 280)N04 M30, cutting tool is not from A the dot walks along to nod to C point-blank move to move to nod ＊ to C along Z axis again to B dot along axis of X, Z first however form of statement of linear interpolation G01: Function of; of ＿ of F of ＿ of G01X_ Z: GOO instruction cutting tool presses F given take a knife most, on the eye punctuation that undertake linear interpolation from current drop and arrives at X, Z to appoint. Explain: X, Z: When G90, to look the coordinate of punctuation is worth. When Gvalue="9" UnitName="l">9l, the punctuation that it is eye (terminal) relatively current drop (only then dot) mobile distance. Note: F is folded make dictate for mode, effective all the time before encountering next F to dictate, when F the instruction also was not appointed when, its feed speed is class old rate. Example pursues for example 2%1009 (2)Nvalue="1" UnitName="g">1 Gvalue="91" UnitName="g">91 G00X seeing a picture one Value="5" UnitName="F">5F300N3Z of one 842 one Value="25" UnitName="m">25M03Nvalue="2" UnitName="g">2 G01 XIOZ one 10NS X20Z of one 45N4 X34Z one 15N6X10normal >Nvalue="7" UnitName="g">7 GOO X10 Z100Nvalue="8" UnitName="m">8 M05Nvalue="9" UnitName="m">9 M30 CNC Milling